Posts: 799
Threads: 46
Joined: Jun 2017
Reputation:
25
2019-02-09, 01:08 PM
(This post was last modified: 2019-02-09, 04:24 PM by jim321.)
what does this command show
sudo i2cdetect -y 1
was it working before and what have you done to it lately .?
i know bmp-280 works i have never tried the bmp-180.
it is setup to use bmE-280 that has a humidity sensor .
the mpu should be 0x68 or 0x69
this is how mine looks with mpu-9255 and bmp280.
pi@openplotter:~ $ sudo i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: 40 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: 70 -- -- -- -- -- 76 --
Posts: 32
Threads: 6
Joined: Mar 2016
Reputation:
0
my bad - i had managed to switch wires to scl/sda... fixed that and MPU9250 now recognized at 0x68 - all good now. Sorry for the false alarm and thanks for the help jim321.