2019-08-05, 05:10 PM
I know your thinking of doing remote with rf key fobs but not sure exactly what you have in mind.
I would prefer can be used remotely without being able to see the display.
For example be on the bow and need to dodge a log.
I'm only talking about what the buttons do.
Operationally like this:
https://www.madmanmarine.com/product-pag...te-control
Manual:
https://docs.wixstatic.com/ugd/376162_8f...c0d250.pdf
Relevant bits from manual:
2.4.3 Button Assignments
The fob buttons are assigned the following functions:
Button A
change 1 degree to port / select Auto
Button B
change 1 degree to starboard / select Standby
Button C
change 10 degrees to port
Button D
change 10 degrees to starboard
Buttons A & C (together) auto-tack to port
Buttons B & D (together) auto-tack to starboard
Buttons A & B (together) select Wind Vane mode
Buttons C & D (together) select Track mode
The buttons are assigned the following mode change functions:
Long Press Button A
select 'Auto’ mode
Long Press Button B
select ‘Standby’ mode (if enabled)
*Buttons A & B
select ‘Wind Vane’ mode#
*Buttons C & D
select ‘Track’ mode
* Must be in ‘Auto’ mode first.
John
I would prefer can be used remotely without being able to see the display.
For example be on the bow and need to dodge a log.
I'm only talking about what the buttons do.
Operationally like this:
https://www.madmanmarine.com/product-pag...te-control
Manual:
https://docs.wixstatic.com/ugd/376162_8f...c0d250.pdf
Relevant bits from manual:
2.4.3 Button Assignments
The fob buttons are assigned the following functions:
Button A
change 1 degree to port / select Auto
Button B
change 1 degree to starboard / select Standby
Button C
change 10 degrees to port
Button D
change 10 degrees to starboard
Buttons A & C (together) auto-tack to port
Buttons B & D (together) auto-tack to starboard
Buttons A & B (together) select Wind Vane mode
Buttons C & D (together) select Track mode
The buttons are assigned the following mode change functions:
Long Press Button A
select 'Auto’ mode
Long Press Button B
select ‘Standby’ mode (if enabled)
*Buttons A & B
select ‘Wind Vane’ mode#
*Buttons C & D
select ‘Track’ mode
* Must be in ‘Auto’ mode first.
John