2020-07-21, 07:46 AM
(This post was last modified: 2020-07-21, 07:50 AM by jamos.tan@gmail.com.)
(2020-07-21, 02:28 AM)abarrow Wrote: A known problem with the Pi4 is interference between the USB3 port and 2.4G Wifi. Is there any way you can try 5G wifi and see if there is any change? Alternatively, if you are using a wifi dongle for your AP, try putting the dongle on a USB extender cable.
Thanks abarrow,
I'll try the 5G, good idea. Also, I do have an external USB connection on the outside of the casing powered seperately. I have connected the dongle on it, but the network settings on Openplotter 2 will not let me use that for the AP. It does work and is recognized by raspbian buster, I can connect it and use it for internet, but not as an AP. I can choose the internet sharing device, but this will not make any difference and will keep choosing the built in WiFi chip as the AP. Any ideas on how I can configure that in OP2?