Whoa that was fast, thanks! I will try the "cat" command tomorrow when back on the boat. Didn't know that was possible, and indeed will allow me to diagnose where the issue is.
As for wiring and polarity, i can check all the possible permutations, but i just found this table that might be useful (Never occured to me that + => B- and - => A+ ):
Regarding the baud rate, i'm not sure where to find it, as i can't find anything on Garmin's or VHF instruction manuals, but i will try with the most usual ones.
Garmin:
Icom VHF:
Nice tip, didn't think of it, will definitely try again tomorrow.
Thanks again, @abarrow
As for wiring and polarity, i can check all the possible permutations, but i just found this table that might be useful (Never occured to me that + => B- and - => A+ ):
Regarding the baud rate, i'm not sure where to find it, as i can't find anything on Garmin's or VHF instruction manuals, but i will try with the most usual ones.
Garmin:
Icom VHF:
Quote:One thing I've done to troubleshoot NMEA connections is to bring them into OpenCPN and use the NMEA debug tool there just to make sure there is readable data coming in.
Nice tip, didn't think of it, will definitely try again tomorrow.
Thanks again, @abarrow