Updated pypilot to latest git and getting errors form pypilot_servo

[cosborne]

I don't think I had a problem with running pypilot from cli until I reinstalled as sudo but I could be wrong. I definitely have an issue now.

Code:

pi@openplotter:~/pypilot/pypilot $ service pypilot stop
pi@openplotter:~/pypilot/pypilot $ pypilot
imu process 23486
nmea process 23491
listening on port 20220 for nmea connections
made imu process realtime
loading servo calibration /home/pi/.pypilot/servocalibration
WARNING: using default servo calibration!!
Using settings file RTIMULib.ini
Settings file not found. Using defaults and creating settings file
Detected MPU9250/MPU9255 at standard address
Using fusion algorithm Kalman STATE4
IMU Name: MPU-925x
min/max compass calibration not in use
Using ellipsoid compass calibration
Using accel calibration
Loaded Pilots: ['absolute', 'basic', 'simple', 'learning']
warning: failed to open special file /dev/watchdog0 for writing
        cannot stroke the watchdog
gps process 23495
pypilotServer process 23498
server setup has 5 pipes
Process Process-6:
Traceback (most recent call last):
 File "/usr/lib/python3.7/multiprocessing/process.py", line 297, in _bootstrap
   self.run()
 File "/usr/lib/python3.7/multiprocessing/process.py", line 99, in run
   self._target(*self._args, **self._kwargs)
 File "/home/pi/.local/lib/python3.7/site-packages/pypilot/server.py", line 398, in run
   self.poll(dt)
 File "/home/pi/.local/lib/python3.7/site-packages/pypilot/server.py", line 564, in poll
   connection.write('watch=' + pyjson.dumps(connection.cwatches) + '\n')
AttributeError: module 'pyjson' has no attribute 'dumps'
serialprobe removing gps device /dev/serial/by-id/usb-u-blox_AG_-_www.u-blox.com_u-blox_7_-_GPS_GNSS_Receiver-if00
MPU-925x init complete
failed send ex 86016.668265574 86016.668315011 module 'pyjson' has no attribute 'dumps'
failed to encode data pipe! imu_pipe[1] module 'pyjson' has no attribute 'dumps'
Process Process-2:
Traceback (most recent call last):
 File "/usr/lib/python3.7/multiprocessing/process.py", line 297, in _bootstrap
   self.run()
 File "/usr/lib/python3.7/multiprocessing/process.py", line 99, in run
   self._target(*self._args, **self._kwargs)
 File "/home/pi/.local/lib/python3.7/site-packages/pypilot/boatimu.py", line 148, in process
   self.poll()
 File "/home/pi/.local/lib/python3.7/site-packages/pypilot/boatimu.py", line 181, in poll
   msgs = self.client.receive()
 File "/home/pi/.local/lib/python3.7/site-packages/pypilot/client.py", line 315, in receive
   self.poll(timeout)
 File "/home/pi/.local/lib/python3.7/site-packages/pypilot/client.py", line 215, in poll
   self.connection.write('watch=' + pyjson.dumps(self.wwatches) + '\n')
AttributeError: module 'pyjson' has no attribute 'dumps'
Traceback (most recent call last):
 File "/usr/local/bin/pypilot", line 11, in <module>
   load_entry_point('pypilot==0.24', 'console_scripts', 'pypilot')()
 File "/home/pi/.local/lib/python3.7/site-packages/pypilot/autopilot.py", line 386, in main
   ap.iteration()
 File "/home/pi/.local/lib/python3.7/site-packages/pypilot/autopilot.py", line 381, in iteration
   time.sleep(dt)
 File "/home/pi/.local/lib/python3.7/site-packages/pypilot/autopilot.py", line 169, in cleanup
   raise KeyboardInterrupt # to get backtrace on all processes
KeyboardInterrupt
closing autopilot
terminate calibration process