2023-03-31, 07:31 PM
1) You might just locate the computer and controller nearby initially, 6-8 inches apart since the wires to the motor can affect the compass if routed in the worst possible way.
yes you can use ethernet wire for the data signal and power. You only need 4 of the 8 wires.
2) I would try without initially. 10 mm^2 wire is oversize, 2.5mm^2 is ok for wiper motor
3) It depends on factors like the boat, how you are sailing it and many more, so impossible to say.
yes you can use ethernet wire for the data signal and power. You only need 4 of the 8 wires.
2) I would try without initially. 10 mm^2 wire is oversize, 2.5mm^2 is ok for wiper motor
3) It depends on factors like the boat, how you are sailing it and many more, so impossible to say.