2023-08-04, 01:11 AM
(2023-08-03, 07:01 PM)baltika_no_9 Wrote: Sounds like a nightmare Alan and now your working card is broken for some reason?
How are you trying to start influxdb? You shouldn't have to.
Getting really intrigued. and frustrated a bit.
The chip in the pi now was created in march I believe. Got it going, then was able to update everything i could. Had a good cell signal and updates worked fine. the basics were working fine, got the desired data on instrument panel. installed the signalK to influx webapp, installed influx via page where one installs it, grafana, etc. When I look at processes, i's not running. click start in the previous window, and in processes, click autostart. Nothing happens. tried multiple times. never had a problem getting influx going at that level before. not getting any errors either. now I had influx working before all the problems started. couldn't get data out, but it was running.
don't know if i'm doing something wrong, missing something, or even something is intermittently wrong in the Pi, e.g. at high temps. been really hot in the boat. leave a small fan on the Pi. it's interesting, as I had everything wrt getting weather, other data working until the ho weather started.m
made a fresh chip today to take down in case in need it. right from the openplotter docs install link where i got the openplotter program before.