2019-07-25, 04:05 AM
(2019-07-25, 03:43 AM)CapnKernel Wrote:(2019-07-25, 01:54 AM)partyvi Wrote:(2019-07-24, 09:08 AM)CapnKernel Wrote: I am interested to try your driver board.Thanks for article, it is about younger brothers
Yeah. It seems avayan hasn't updated that site in a few years, sadly. He's a good writer.
[quote pid='9644' dateline='1564016071']
To be clear I will send empty board. But for free
Components you will need to source yourself.
If you want board and you are in the US, send
me your address in private message, I will send you board.
Thank you, kind offer. But if and when I make it, I'll do the board myself (oh and I'm in Australia). What EDA package did you use? I usually use KiCad because I like open source.
As an aside, I reverse engineered the circuit for my Autohelm 3000:
https://github.com/CapnKernel/ah3000 .
I did the schematic, component placement, and a fair amount of the routing. Helped me find and fix the problem: One end of a resistor had never been soldered.
Mitch.
[/quote]
Did you see my github, there gerbers and schematic in pdf. I use Altium.
Can share design files if you need.
In my design arduino just sit over top of the board (sandwiched). As well my board gives pretty wide ways to play with DRV chip if you wish to try another modes.