2019-01-25, 02:27 PM
(2018-11-10, 02:49 PM)Bojayne@yahoo.com Wrote:(2017-06-13, 05:32 PM)Sailoog Wrote:I have a shipmodule Multiplexor with blue tooth. Can this be added via bluetooth(2017-06-10, 05:06 PM)JeroenAdam Wrote: ShipModul MiniPlex-3USB
I added the multiplexer as a new device ttyOP_1 using USB manager and I added a NMEA 0183 serial input on port /dev/ttyOP_1 with 57600 bauds
No NMEA data stream in OpenCPN
**UPDATE** MiniPlex-3USB runs on 460800 baud
**UPDATE** Fixed with -> sudo stty -F /dev/ttyUSB0 460800
thanks!
yes, but the serial blutooth has to be set up. connect to the device in the bt-menu.
then do some init with he mac addresses of you devices. i do this before the end of /etc/rc.local but you can do it in any bootfile.
------- chage to your devices: -----------
# bluetooth gps
rfcomm bind 0 20:13:07:31:20:47 # achterschiff Liesbeth
rfcomm bind 2 20:13:07:31:19:51 # L-sensorik
rfcomm bind 1 00:15:4B:11:1A:95 # bt-bluetooth
-------------------------
after init, you should find the serial under /dev/rfcommX in openplotter/kplex tab.
good luck, holger