2018-06-18, 11:22 PM
(2018-06-18, 07:07 AM)PaddyB Wrote:(2018-06-18, 01:03 AM)Smartell Wrote: Paddy, you are correct. Did a new check and after "startup stop" i got a clean log in putty, no misbehavior from my mast unit (apart from the linefeeding business)
/M
OK, just had another thought - after startup stop you could try setting up Opencpn to get data direct from the Nasa by adding a serial port pointing at the dev/*** port which is the USB/serial. I think opencpn debug nmea shows the line returns etc as hex so that might show just what is getting sent by the Nasa.
Also, found this on google, though haven't really read through it yet >
https://groups.google.com/forum/#!topic/...ReQRE48kv0
Checked the output from the mast unit and the only thing sent between the checksum and the $ of the next message is 0D which i think is a CR so there is no LF
/M