2018-05-04, 12:35 PM
Hello,
I have a Raspberry pi 3 running OpenPlotter v 0.17.1 plugged on my boat battery through 24v to usb converter.
The problem is that when the Raspberry (running Open CPN 4.8.4) is shut down abruptly (power shutdown due to low battery etc), the OpenCPN configuration file get corrupted. At the next startup the configuration file is blank, and OpenCPN replaces it with the default one. Meaning that I need to configure again everything in OpenCPN including NMEA ports, default chart folders etc...
I found a workaround by backing up the configuration file and replacing at each Raspberry crash...
Anyone experiencing the same issue?
I have a Raspberry pi 3 running OpenPlotter v 0.17.1 plugged on my boat battery through 24v to usb converter.
The problem is that when the Raspberry (running Open CPN 4.8.4) is shut down abruptly (power shutdown due to low battery etc), the OpenCPN configuration file get corrupted. At the next startup the configuration file is blank, and OpenCPN replaces it with the default one. Meaning that I need to configure again everything in OpenCPN including NMEA ports, default chart folders etc...
I found a workaround by backing up the configuration file and replacing at each Raspberry crash...
Anyone experiencing the same issue?