2016-06-21, 05:37 PM
Let my try to jump in as I experienced the same difficulty.
Thats what I did and now its stable:
Make sure the wlan0 settings for the AP are set in the /boot/config.txt file, including the share=wlan1 parameter
Configure in menu/preferences/network connections the wlan1 for the i/net gateway (make sure you use the correct wlan mac address for wlan1)
when you now reboot the wlan0 should be the AP and wlan1 the i/n share.
Hope this helps!
Thats what I did and now its stable:
Make sure the wlan0 settings for the AP are set in the /boot/config.txt file, including the share=wlan1 parameter
Configure in menu/preferences/network connections the wlan1 for the i/net gateway (make sure you use the correct wlan mac address for wlan1)
when you now reboot the wlan0 should be the AP and wlan1 the i/n share.
Hope this helps!