E-sailing,
Thanks for that, it is usefull to know it can be set up like that. Filtering needs to be more comprehensive though as iSailor Supported NMEA output sentences are: APB, BOD, BWC, BWR, HSC, RMB, RMC and XTE. NMEA input rudder angle: RSA.
I solved the problem by inputting to opencpn from isailor then using opencpn to output to my serial link. All tested ok except the serial link which is not wired yet.
This is my setup, note that I use address 0.0.0.0 in opencpn to act as a server for any connection on port 10111, then I do not need to know the ipads ip address on the openplotter ap.
Still can’t upload files for some reason... pdf can be found here
https://www.dropbox.com/s/vdpw8vj2frv3ya...p.pdf?dl=0
Thanks for that, it is usefull to know it can be set up like that. Filtering needs to be more comprehensive though as iSailor Supported NMEA output sentences are: APB, BOD, BWC, BWR, HSC, RMB, RMC and XTE. NMEA input rudder angle: RSA.
I solved the problem by inputting to opencpn from isailor then using opencpn to output to my serial link. All tested ok except the serial link which is not wired yet.
This is my setup, note that I use address 0.0.0.0 in opencpn to act as a server for any connection on port 10111, then I do not need to know the ipads ip address on the openplotter ap.
Still can’t upload files for some reason... pdf can be found here
https://www.dropbox.com/s/vdpw8vj2frv3ya...p.pdf?dl=0