2018-10-05, 11:43 AM
(2018-10-05, 11:38 AM)PaddyB Wrote:Thanks!(2018-10-05, 10:54 AM)vagspel Wrote: Hi PaddyB
The last two are connections to our AIS server. Easier to use that when I am out showing OpenCPN to our sailing community www.jrsk.org.
On all our AIS station we have a RP with Kplex that is sending the data to our server and then send it on to for example MT and VF.
This is one station: http://stations.vesselfinder.com/stations/5125
The serial connection is lost when I restart PI and the start Opcn, no data is coming in but data is sent via the AP.
If I delete the USB0 and enable it again it works. Sometimes restarting Ocpn helps but not every time. I think that the problem is not in OP but Ocpn!?
I am using the serial connection for a local AIS that I have at home. Gives better info on the result when changing receivers or antennas :-)
Nice site
Did you know signalk has an app to send position to marinetraffic? (Though a very quick play I couldn't get it to work...)
Not sure I can help much with the serial connection - when it shows no data in OCPN is there anything coming in the diagnostic window in the Kplex tab?
I have not checked the Kplex diagnostic, will do asap.
Will try the app but the setup that we have is working very nice. Why change a working concept :-)