|
Node Red Integration
|
2019-01-10, 12:16 PM
(2019-01-10, 12:33 AM)skipper@sy-barranas Wrote: How can I connect a sensor to Openplotter/SignalK? Connect the ds18b20 sensor to the Pi, lots tutorials online about how to. Then set up in the 1W tab in openplotter. That's it, temperature data will be output as signalk or mapped to nmea0183 as well with a signalk plugin. Old manual, but looks the same > https://sailoog.gitbooks.io/openplotter-...DS18B20.md |
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Node Red Integration - by skipper@sy-barranas - 2019-01-10, 12:33 AM
RE: Node Red Integration - by jim321 - 2019-01-10, 06:16 AM
RE: Node Red Integration - by jim321 - 2019-01-10, 11:55 AM
RE: Node Red Integration - by PaddyB - 2019-01-10, 12:16 PM
RE: Node Red Integration - by dione - 2019-01-15, 11:08 AM
RE: Node Red Integration - by jim321 - 2019-01-15, 12:01 PM
RE: Node Red Integration - by skipper@sy-barranas - 2019-01-15, 12:51 PM
RE: Node Red Integration - by jim321 - 2019-01-15, 02:08 PM
RE: Node Red Integration - by dione - 2019-01-15, 04:58 PM
RE: Node Red Integration - by svtgd - 2019-02-02, 03:12 PM
RE: Node Red Integration - by svtgd - 2019-02-01, 08:42 PM
RE: Node Red Integration - by jim321 - 2019-02-01, 11:21 PM
|
