Send all signalK event to UDP Port (for using navionics on ipad)

[pkernevez]

Hello,

I installed and configure my pi, every thing works fine. OpenCPN receives all the relevant information on TCP 10110 from signalK.
I would like to configure the network to receive the same NMEA messages on UDP 2000 for an application navionicson my ipad connected to the network .
I tried to use KPlex for that, as it's a multiplexer and it has udp output.
But Kplex only see a limited part of my messages : GPS and pressure (coming from I2C/BME280).
The other messages are directly send to SignalK via OPpypilot or OPsensors.

I thought to define a TCP route from SignalK to Kplex and then send all the messages to UDP through KPlex. But I think it will create a messages overflow as the same message will be sent and resent between KPlex and SignalK.


How can I sent all the message from KPlex to UDP ?

Regards,
Philippe

My configuration :
Openplotter 1.2.0 alpha
PI 3
SignalK 1.10.2

Sensors :
RS422/485 (NMEA input)
GPS USB

DS18B20 (temperature)
BME280 (pressure)
MPU 9255 (accelerator & compas)

 

Configuration signalk :

Code:

{
    "enablePluginLogging":true,
    "interfaces":{
        "appstore":true,
        "nmea-tcp":true,
        "plugins":true,
        "providers":true,
        "rest":true,
        "tcp":true,
        "webapps":true,
        "ws":true
    },
    "loggingDirectory":"/home/pi/Logs",
    "mdns":false,
    "pipedProviders":[
        {
            "enabled":false,
            "id":"OPcan",
            "pipeElements":[
                {
                    "options":{
                        "logging":false,
                        "subOptions":{
                            "device":"/dev/ttyOP_",
                            "type":"ngt-1"
                        },
                        "type":"NMEA2000"
                    },
                    "type":"providers/simple"
                }
            ]
        },
        {
            "enabled":false,
            "id":"OPpypilot",
            "pipeElements":[
                {
                    "options":{
                        "logging":false,
                        "subOptions":{
                            "host":"localhost",
                            "port":"20220",
                            "type":"tcp"
                        },
                        "type":"NMEA0183"
                    },
                    "type":"providers/simple"
                }
            ]
        },
        {
            "enabled":true,
            "id":"OPkplex",
            "pipeElements":[
                {
                    "options":{
                        "logging":false,
                        "subOptions":{
                            "host":"localhost",
                            "port":"30330",
                            "type":"tcp"
                        },
                        "type":"NMEA0183"
                    },
                    "type":"providers/simple"
                }
            ]
        },
        {
            "enabled":true,
            "id":"OPwifi",
            "pipeElements":[
                {
                    "options":{
                        "logging":false,
                        "subOptions":{
                            "port":"55561",
                            "type":"udp"
                        },
                        "type":"SignalK"
                    },
                    "type":"providers/simple"
                }
            ]
        },
        {
            "enabled":true,
            "id":"OPserial",
            "pipeElements":[
                {
                    "options":{
                        "logging":false,
                        "subOptions":{
                            "port":"55559",
                            "type":"udp"
                        },
                        "type":"SignalK"
                    },
                    "type":"providers/simple"
                }
            ]
        },
        {
            "enabled":true,
            "id":"OPnotifications",
            "pipeElements":[
                {
                    "options":{
                        "logging":false,
                        "subOptions":{
                            "port":"55558",
                            "type":"udp"
                        },
                        "type":"SignalK"
                    },
                    "type":"providers/simple"
                }
            ]
        },
        {
            "enabled":true,
            "id":"OPsensors",
            "pipeElements":[
                {
                    "options":{
                        "logging":false,
                        "subOptions":{
                            "port":"55557",
                            "type":"udp"
                        },
                        "type":"SignalK"
                    },
                    "type":"providers/simple"
                }
            ]
        }
    ],
    "port":3000,
    "security":{
        "strategy":"@signalk/sk-simple-token-security"
    },
    "ssl":false,
    "sslport":3443

Configuration KPlex :

Code:

# For advanced manual configuration, please visit: http://www.stripydog.com/kplex/configuration.html
# Please do not modify defaults nor OpenPlotter GUI settings.
# Add manual settings at the end of the document.

###defaults

[udp]
name=system
direction=in
port=10110

[tcp]
name=signalk
direction=out
mode=server
port=30330


###end of defaults

###OpenPlotter GUI settings

[udp]
name=pub_net
direction=out
optional=yes
address=10.10.10.255
port=2000

[serial]
name=gp
direction=in
optional=yes
filename=/dev/ttyOP_gp
baud=4800

###end of OpenPlotter GUI settings

###Manual settings