2019-07-18, 03:33 PM
(This post was last modified: 2019-07-18, 03:42 PM by seandepagnier.)
Good to hear client mode is working in the latest image.
It should be possible to switch between client and ap mode through the menu using the remote or keypad then reboot.
It is possible to have an additional wifi adaptor connect as a client to another network. for this, and other less common network setups you will have to modify the boot scripts.
Do I still need to implement the startup button to select wifi mode? What if changing the mode from the lcd menu does not need to reboot? There is no (nice) way to type the AP name using the remote, so for now you might have to switch to AP mode in the menu, then from the web interface type the ap name.
As for a fixed ip. It may be best to do from openplotter or the access point, but I will try to add this option as well for the next release.
syohana,
you will need to re-image the sd card with the new beta image to get working wifi client mode
It should be possible to switch between client and ap mode through the menu using the remote or keypad then reboot.
It is possible to have an additional wifi adaptor connect as a client to another network. for this, and other less common network setups you will have to modify the boot scripts.
Do I still need to implement the startup button to select wifi mode? What if changing the mode from the lcd menu does not need to reboot? There is no (nice) way to type the AP name using the remote, so for now you might have to switch to AP mode in the menu, then from the web interface type the ap name.
As for a fixed ip. It may be best to do from openplotter or the access point, but I will try to add this option as well for the next release.
syohana,
you will need to re-image the sd card with the new beta image to get working wifi client mode