Client-less VNC Control in the Browser

[luchin0]

Finally i get into novnc, port is 6080 not 8080, but when i try to connect from client, in the terminal come error: code 400 client must support binary or base 64 protocol.

Someone have some solut?

Inviato dal mio ANE-LX2 utilizzando Tapatalk

Hmm, I'd say the issue is with the line you manually added.   The 'su - pi -c ' part of that line is going to tell the OS to run this command as the 'pi' user. Because your server is running on 6080 instead of 8080, it seems like this command is not running correctly.

From the terminal, logged in as the 'pi' user, can you run the command '/home/pi/bin/noVNC/utils/launch.sh --vnc 127.0.0.1:5901 --listen 8080' ?  This will run the command manually and may give you an idea of where to troubleshoot next. I'd also check that your VNC server is actually running on 5901 (You should be able to connect with other VNC clients)

I run the command /bin/noVNC/utils/launch.sh etc.

Same problem as you see in the screen shot

Inviato dal mio ANE-LX2 utilizzando Tapatalk

---

The only error i seen is about self.pem

Inviato dal mio ANE-LX2 utilizzando Tapatalk

---

In the advanced setting - > websocket of the browser of the tablet i check the encrypt. Now the error in the op terminal is

10.10.10.80: SSL connection but '/home/pi/self.pem' not found

Inviato dal mio ANE-LX2 utilizzando Tapatalk