This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Windvane weather sensors with display virtual serial port connectivity
#1
Recently I ordered and received weather sensors with display. 
[Image: A7iVnCxqOCxQlbmhKF6wbTRPI4oosaVqThXeft8q...NjzdIfYh2h]



I purchased a Davis anemometer and got it all connected initially at home where I could do some testing then connect it to my Openplotter. Upon completing that I was able to view my wind speed and direction it on Opencpn .[Image: nIClQm7mJK6bqWfvOxFqb25Jjvt_2mIgIFD1q_GA...nEB9JEC_HV]


















[Image: kHgXLB6JYIgDrAyoITtf8WoNlYKTS0_3xM4xgvmw...s5owRo4bKH]


Now how ever upon moving things to the boat I have the arduino board running and can see that it is working from the lcd screen but I can not seem to get it to connect to the openplotter raspberry pi or the Oepncpn instance. There has been an upgrade since then and it seems to me that the Serial0/ttyusb0 connectivity I had prior to the update is somehow different and may be causing the issues. I no longer even have ttyusb0 I now seem to have these instead and I can not find the great document I had used in setting this up in the first place. So I am hoping I can get someone to point me in the right direction to reestablish the virtual serial port from the arduino to the raspberry pi/openplotter/opencpn. 


ttyACM0
ttyAMA0
ttyS0 ------> used by the Moitessier HAT


[Image: zBEnV090_UpfESupYwGwP7EMde1GpHC95VImGS8z...pnwdtvX4VU]


Thanks for any assistance.


Mark 






 
Reply


Messages In This Thread
Windvane weather sensors with display virtual serial port connectivity - by mmcintosh - 2019-07-02, 01:59 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)