(2020-01-10, 11:25 AM)Sailoog Wrote: Pressure - Temperature
You have an error in I2C app. You have installed the latest version without removing the old settings as we warned. Open file /home/pi/.openplotter/openplotter.conf and remove any data under [I2C] tag. After configuring the sensors again everything will work including another error you have in network app.
Thanks Sailoog
So I have deleted everything under the [12C] tag and reinstalled 12C, now the 12C app opens.
There were two 12C addresses listed 68 and 77+
SO I added them both on the sensor tab and created the connections sk - NMEA 0183.
I now get GPS connection and I get Pressure but I am not getting temperature. Do you know what might cause this?