2020-01-31, 08:40 PM
Hi all,
I've got a Garmin chartplotter / depth sounder (the ECHOMAP 45CV) which has a NMEA0183 interface, which is connected through a USB Serial adapter to my Raspberry PI running OpenPlotter 2.
The input side works properly; I see the depth data coming into SignalK.
However, this device is able to display AIS data, which I was able to do under OpenPlotter 1 using Kplex.
How do I do that in OpenPlotter 2? The data I want is available from the SignalK output plugin on TCP port 10110, but I want to send it out through a serial port.
I'll also need to be able to do that with my VHF radio, so I have GPS position for DSC distress call.
Any ideas?
I've got a Garmin chartplotter / depth sounder (the ECHOMAP 45CV) which has a NMEA0183 interface, which is connected through a USB Serial adapter to my Raspberry PI running OpenPlotter 2.
The input side works properly; I see the depth data coming into SignalK.
However, this device is able to display AIS data, which I was able to do under OpenPlotter 1 using Kplex.
How do I do that in OpenPlotter 2? The data I want is available from the SignalK output plugin on TCP port 10110, but I want to send it out through a serial port.
I'll also need to be able to do that with my VHF radio, so I have GPS position for DSC distress call.
Any ideas?