2016-04-02, 12:39 PM
(This post was last modified: 2016-04-02, 12:41 PM by SkipperEarly.)
Have just received the GPS dongle.
Inspector shows:
$GPRMC,112742.00,V,,,,,,,020416,,,N*7F
$GPVTG,,,,,,,,,N*30
$GPGGA,112742.00,,,,,0,03,2.49,,,,,,*59
$GPGSA,A,1,20,17,05,,,,,,,,,,2.68,2.49,1.00*03
$GPGSV,3,1,11,05,25,208,23,07,08,079,,08,05,024,,13,84,283,*7F
$GPGSV,3,2,11,15,43,301,21,17,16,132,26,18,11,324,12,20,36,264,25*70
$GPGSV,3,3,11,24,13,267,,28,67,086,,30,36,074,19*46
$GPGLL,,,,,112742.00,V,N*49
but underneath in the detailed view only the Date/Time is shown, not Lat/Lon
I am using English language setting but German-Austrian keybord setting.
Have tried various language settings as I suspected the . vs , in the decimal setting to cause this issue but makes no difference.
Any suggestions what I can try now?
Thanks for help!
should have added that I connected the OP output to various programs like OpenCPN but got no position reading.
Inspector shows:
$GPRMC,112742.00,V,,,,,,,020416,,,N*7F
$GPVTG,,,,,,,,,N*30
$GPGGA,112742.00,,,,,0,03,2.49,,,,,,*59
$GPGSA,A,1,20,17,05,,,,,,,,,,2.68,2.49,1.00*03
$GPGSV,3,1,11,05,25,208,23,07,08,079,,08,05,024,,13,84,283,*7F
$GPGSV,3,2,11,15,43,301,21,17,16,132,26,18,11,324,12,20,36,264,25*70
$GPGSV,3,3,11,24,13,267,,28,67,086,,30,36,074,19*46
$GPGLL,,,,,112742.00,V,N*49
but underneath in the detailed view only the Date/Time is shown, not Lat/Lon
I am using English language setting but German-Austrian keybord setting.
Have tried various language settings as I suspected the . vs , in the decimal setting to cause this issue but makes no difference.
Any suggestions what I can try now?
Thanks for help!
should have added that I connected the OP output to various programs like OpenCPN but got no position reading.