2020-03-25, 10:44 AM
(This post was last modified: 2020-03-25, 10:48 AM by jamos.tan@gmail.com.)
Hmm, that would be a challenge in my case. I am using openplotter on a 3b+, but I guess I could use another extra pi just for the pilot. I do have one laying around here.
Would this be a more stable "redundant like" option? I guess my set-up would be something like:
- Raspberry 3b+ with Openplotter runs all the serial connections and signalk, this system also has all my sensors like GPS, gyro, etc.
- Another 3b+ with tinypilot runs seperately and can be upgraded normally through GIT and that one is connected to the Arduino.
Those two connect to eachother by LAN or WLAN, or maybe even serial / usb?
I am not sure as how to control the pilot through the primary 3b+ that runs Openplotter though,
Would this be a more stable "redundant like" option? I guess my set-up would be something like:
- Raspberry 3b+ with Openplotter runs all the serial connections and signalk, this system also has all my sensors like GPS, gyro, etc.
- Another 3b+ with tinypilot runs seperately and can be upgraded normally through GIT and that one is connected to the Arduino.
Those two connect to eachother by LAN or WLAN, or maybe even serial / usb?
I am not sure as how to control the pilot through the primary 3b+ that runs Openplotter though,