2020-03-25, 02:23 PM
That's super useful info. I'll do some digging around about options for having some info and control in the cockpit.
Could you also let me know how the Pi is connected to the motor controller board? It's shown as a waterproof connector, but what sort? To align the installation to the current setup and to simplify the wiring I'd be looking at putting the Pi at the nav-station and the motor controller board close to the Raymarine ram. It's about 6 metres between the two things, but likely further once the cable is run through ducts etc.
Sent from my moto g(7) using Tapatalk
Could you also let me know how the Pi is connected to the motor controller board? It's shown as a waterproof connector, but what sort? To align the installation to the current setup and to simplify the wiring I'd be looking at putting the Pi at the nav-station and the motor controller board close to the Raymarine ram. It's about 6 metres between the two things, but likely further once the cable is run through ducts etc.
Sent from my moto g(7) using Tapatalk