2020-04-22, 12:15 AM
OK, so I tied AD0 to to 3.3V and now "i2cdetect -y 1" shows address 0x69. However, no change to anything in my first post #1. Pypilot interface shows "Detected IMU: Auto Discover". Output from "pypilot_boatimu" shows "No IMU detected", etc.
Any other ideas? Do I have to edit RTIMULib.ini? Do I have two bad IMUs? Should I just buy a different type?
Any other ideas? Do I have to edit RTIMULib.ini? Do I have two bad IMUs? Should I just buy a different type?