2021-05-25, 10:18 AM
Hello,
I have an installation of an RPI4 with Openplotter and a Raymarine network. For connecting the Seatalk / NMEA 2000 network I am using a vyacht router which is connected to a router (and also a PC running OpenCPN).
in OpenCPN (installed with Openplotter) I can connect easily via wifi and the Tcp connection to the vyacht / NMEA data and I can receive everything in OpenCPN. It works the same way on the PC with OpenCPN (just that the vyacht is hardwired).
I wanted now to see boat data using Signal K but I seem to be missing something to pass the data to the Signal K server on the RPI. I tried to add some connections in Signal K via TCP and used the address of the vyacht but I have not been successful :-(
I also could not connect the boat data to avnav, this seems somehow related.
However, I am able to access the signal K data from the vyacht directly in the bowser (on RPi4 and on the PC)
It seems that I am missing something here, any help would be highly appreciated.
I have an installation of an RPI4 with Openplotter and a Raymarine network. For connecting the Seatalk / NMEA 2000 network I am using a vyacht router which is connected to a router (and also a PC running OpenCPN).
in OpenCPN (installed with Openplotter) I can connect easily via wifi and the Tcp connection to the vyacht / NMEA data and I can receive everything in OpenCPN. It works the same way on the PC with OpenCPN (just that the vyacht is hardwired).
I wanted now to see boat data using Signal K but I seem to be missing something to pass the data to the Signal K server on the RPI. I tried to add some connections in Signal K via TCP and used the address of the vyacht but I have not been successful :-(
I also could not connect the boat data to avnav, this seems somehow related.
However, I am able to access the signal K data from the vyacht directly in the bowser (on RPi4 and on the PC)
It seems that I am missing something here, any help would be highly appreciated.