2022-04-29, 07:07 PM
(2022-04-29, 04:39 PM)abarrow Wrote: The Daisy AIS hat really doesn't need anything from the RPI other than a free UART. You get that by using the instructions that come with the Daisy Hat for disabling bluetooth and activating the UART connections on your RPI.
So, you don't need the Moitessier Hat software, in fact, it's probably not a good idea to install it in your case. Just plug the Daisy on to your RPI, enable the UART using instructions, and use Openplotter-serial to assign the serial port for the Daisy hat. Baud rate will be 38400kbps, NMEA0183.
That's really all you need to do.
Thank you very much for your help! I was attracted by all the other softwares that come with the Moitessier Hat option and future use for them...