2022-10-13, 02:40 PM
I have a problem in getting my wind data into signalK. I have set up a serial link to digital yacht's nmea/USB adaptor connected to my NASA nmea wind instrument. The adaptor seems to be working in that its debug light is flashing and the input has triggered the wind panel in the signalK instruments. However on looking at the data, I see only one wind direction and one speed message and the instrument panel does not respond to changes in wind speed and direction. Can anyone advise what may be happening to seeming stop the stream after the first sentence? Baud rate is set to 4800, which matches the wind instrument and the usb adaptor matches the application, in this case the Signal K server.