2023-07-29, 09:49 AM
(2023-02-18, 07:24 PM)Sailoog Wrote: If Signal k detects your serial devices but openplotter-serial does not, that means that somehow you have lost permission to read serial devices for non admin users.
To confirm this open a terminal and type:
lsusb
then type this and compare results:
sudo lsusb
any difference?
Hello!
Same problem here: Serial GNSS hat doesn´t show up as device but the connection is there (GPSD) and it works. No alias though and can´t find any way to create one.
Activated the connection with the GNSS following instrtuctions on https://www.waveshare.com/wiki/MAX-M8Q_GNSS_HAT:
#Open gpsd file
sudo nano /etc/default/gpsd
#Change the below codes of file and save
USBAUTO="false"
DEVICES="/dev/ttyS0"
GPSD_OPTIONS="/dev/ttyUSB0"