Hello
thanks for releasing OP 0.10 which works nice on simple RPi 2. But as soon as I put on the UPS Pico Hat it won't boot anymore. After the colourful first boot screen, it tells
sh: can't access tty; job control turned off
and drops out to an emergency prompt: /#
dmesg shows nothing suspicious, it stops after initializing USB.
Did you change anything with regard to the "normal" raspian boot sequence ?
The Pico needs to reserve GPIO 22 et 27 - are they used by any other process on OP 0.10 ?
OP 0.8 worked nicely with the Pico but : http://forum.openmarine.net/showthread.php?tid=384
Thanks in advance
Christian
thanks for releasing OP 0.10 which works nice on simple RPi 2. But as soon as I put on the UPS Pico Hat it won't boot anymore. After the colourful first boot screen, it tells
sh: can't access tty; job control turned off
and drops out to an emergency prompt: /#
dmesg shows nothing suspicious, it stops after initializing USB.
Did you change anything with regard to the "normal" raspian boot sequence ?
The Pico needs to reserve GPIO 22 et 27 - are they used by any other process on OP 0.10 ?
OP 0.8 worked nicely with the Pico but : http://forum.openmarine.net/showthread.php?tid=384
Thanks in advance
Christian