2023-12-06, 11:27 PM
(2023-11-28, 06:31 AM)seandepagnier Wrote: If you are sure the connections are good, the best way is to try a different sensor, and/or pi to see which one is the issue. For example you could have damaged the i2c bus on the pi, and the sensor is fine.
Also if you can try a fresh sd card to rule out software.
Thanks for the hints, @Sean. I just tested the new sensor but it is still not detected. I also tried a fresh sd card and got the same error. Next I will try to find another pi to test if the i2c bus is damaged. Will report back later. Many thanks!