2017-06-28, 05:04 PM
(2017-06-28, 02:38 PM)abarrow Wrote: Right now, your eth0 port is still set up to get it's address from DHCP. Also, the only entry I see for wlan1 is in the post-up iptables line.File: /etc/hostapd/hostapd.conf
What's in your /etc/hostapd/hostapd.conf file?
interface=wlan0
hw_mode=g
channel=6
ieee80211n=1
ht_capab=[HT40][SHORT-GI-20][DSSS_CCK-40]
macaddr_acl=0
wmm_enabled=1
ssid=OpenPlotter
auth_algs=1
wpa=2
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
wpa_passphrase=12345678