2016-04-11, 03:43 PM
(2016-03-23, 10:58 AM)Tacmed Wrote: You have R+ and R- the RS422 standard requires a common ground. In your case you have two wires, whereas you need 3 wires. The signals on R pos and neg, are in relation to zero volts or ground.
Hi!
Is there a documentation, how to configure the USB-NMEA0183 adapter? I do not get it to work.
In the USB Manager I added the USB-NMEA0183 adapter as: ttyOP_SERUSB
On NMEA0182 I added a new Input with ttyOP-SERUSB, 4800 baud, no filtering
On the USB adapter the green LED ids blinking, when connecting to the 0183datastream from the plotter.
But with the inspector I only can see my sensor data nmea sentences.
In OpenCPN I cant see the sensor data, nor the plotter data from the USB-NMEA0183 converter.
How is this configured correctly?
greetings,
Martin