GY-87 signalk doesn't work

[e-sailing]

Some settings have been changed in 14.
All compass settings have been pushed from i2c Tab to compass tab.
There are default SignalK settings for humidity and pressure but not for temperature. Double click on the temperature line in i2c tab.
Select environment water/inside/outside/... temperature.
If these values are visible in signalk diagnostic-> SignalK is OK.
In the tool section -> calculation has changed (no switch for 0.8 compatibility anymore which generates the old nmea 0183 sentences)
If sailoog merges the pull request #177. There will be a default button to generate opencpn compatible nmea sentences in nmea0183 generator for:
-compass
-roll
-pitch
-air pressure
-water temp
-air temp

update_signalk_settings.py is part of update_settings.sh
It should be used only within update_settings.sh

If you want to reinstall signalk from terminal do:
cd .config
mv signalk-server-node signalk-server-node-bak
git clone https://github.com/SignalK/signalk-server-node.git
cd signalk-server-node
npm install
sudo reboot