OpenCPN 4.8.0 won't start on OpenPlotter 14.4

[dorsetjon]

I deleted /home/pi/.opencpn/ but the problem still occurs.

I also ticked the "OpenCPN", "noOpenGL" and "fullscreen" checkboxes on the OpenPlotter "Startup" tab but OpenCPN wasn't visible after a reboot and the opencpn process was spinning.

I've upgraded OpenPlotter to 0.15.1 beta and also re-ran the OpenCPN update but those haven't helped.

Here is the output from the log file. Let me know if you want the log file's output from the last time OpenCPN started properly.

________
17:54:29 BST: 2017-09-12
17:54:29 BST: ------- Starting OpenCPN -------
17:54:29 BST: Version 4.8.0 Build 2017-08-11
17:54:30 BST: wxWidgets version: wxWidgets 3.0.0 Linux 32 bit wxGTK
17:54:30 BST: MemoryStatus: mem_total: 923 mb, mem_initial: 23 mb
17:54:30 BST: SData_Locn is /usr/share/opencpn/
17:54:30 BST: PrivateDataDir is /home/pi/.opencpn
17:54:30 BST: Using existing Config_File: /home/pi/.opencpn/opencpn.conf
17:54:30 BST: Switch InlandEcdis mode Off
17:54:30 BST: Setting Viewpoint Lat/Lon 50.598, -2.4518
17:54:30 BST: Setting Ownship Lat/Lon 50.598, -2.4518
17:54:30 BST: Styles loading from /usr/share/opencpn/uidata/styles.xml
17:54:30 BST: No styles found at: /home/pi/
17:54:30 BST: No styles found at: /home/pi/.opencpn/
17:54:30 BST: Using SVG Icons
17:54:30 BST: Detected display size (horizontal): 100 mm
17:54:30 BST: Getting DefaultSystemLocale...
17:54:30 BST: System default Language: en_US
17:54:30 BST: Config file language: en_US
17:54:30 BST: Adjusted App language: en_US
17:54:30 BST: Opencpn language load for: en_US
17:54:30 BST: Loading catalog for opencpn core.
17:54:30 BST: Getting DefaultSystemLocale...
17:54:30 BST: Opencpn language set to: en_US