2018-02-05, 12:24 PM
Success!
I found a recent guide on how to connect signalk etc through the Pican2 interface board.
Just follow the guide here: https://bastelbude.grade.de/mediawiki/in...tup_piCAN2:
With that setup and adding some plug-ins in SignalK (send to canbus, signalk-to-nmea2000) I got my OP-RPi listening and sending on the N2K bus.
One confusing thing is that OP
tab on N2K is not recognizing any of it working. Adding an option for using CAN0 instead of CAN-USB would get OP into the game as well, or? For now I'll just have to work through SignalK's interface.
My goal is to display polar performance data from Qtvlm on my Raymarine i70 display. For that I need to disguise the data as for example Waste water tank level and send it on the N2K bus. I have not figured out that part exactly yet. Any ideas are welcome.
I found a recent guide on how to connect signalk etc through the Pican2 interface board.
Just follow the guide here: https://bastelbude.grade.de/mediawiki/in...tup_piCAN2:
With that setup and adding some plug-ins in SignalK (send to canbus, signalk-to-nmea2000) I got my OP-RPi listening and sending on the N2K bus.
One confusing thing is that OP
tab on N2K is not recognizing any of it working. Adding an option for using CAN0 instead of CAN-USB would get OP into the game as well, or? For now I'll just have to work through SignalK's interface.My goal is to display polar performance data from Qtvlm on my Raymarine i70 display. For that I need to disguise the data as for example Waste water tank level and send it on the N2K bus. I have not figured out that part exactly yet. Any ideas are welcome.