2017-12-04, 07:27 PM
(This post was last modified: 2017-12-04, 07:41 PM by bmayer.
Edit Reason: citation / link from solution source
)
(2017-12-04, 06:39 PM)abarrow Wrote: I assume you are using the Raspberry Pi UARTS on GPIO 14 and GPIO 15?pins 8 and 10 (physical) , pins 15 and 16 (wPi), pins 14 and 15 (BCM)
If you are using a RPI3, you need to first disable the Bluetooth connection, as it uses the RPI UART.
You might be better off using a USB-DB9 converter.
There is a good description of RPI UARTS here: https://www.raspberrypi.org/documentatio...on/uart.md
i see that by $ gpio detectall
it's RPi 2
i like simple things, like my boat :-D
:-) thanks abarrow !
i try all yesterday long, and, after a good nigth, (and a good job day), i have the solution.
Raspbian start using this tty for his own console.
its mandatory to modiffy /boot/cmdline.txt (caution, this file are made in 1 line)
to suppress "console=serial0.115200" from this line
Thanks to https://raspberrypi.stackexchange.com/qu...ian-jessie