2017-12-24, 11:04 AM
(2017-12-12, 10:24 PM)e-sailing Wrote:(2017-12-11, 09:16 PM)Alpenskipper Wrote: Am I the only one with this problem?
Where is my mistake?
I used your config and ads1115 and i2c started as they should. I didn't test GPIO input.
If you use "startup restart" does everything work after that?
If it is not power issue, I would delete i2c and deactivate ads1115. Test if the GPIO input and action work.
Then add step by step i2c and ads1115 to your system, to find the beginning of your problems.
Uncheck Autostart Node-Red (there could be a problem with node red)
BTW: Why have you got 3 wlan devices? (wlan0, wlan2 so there should be a wlan1)
Thanks for testing, Sailoog!
I use 3 WLANs: one for internal AP, one for the marina wifi and one with external antenna for long distance.
Yesterday I set up a totally clean install. Updated raspbian and OP (0.16) with the help of OPs update function.
I simulated several GPIO states with a cable bridge. Node red, ads1115 and i2c are not activated.
Still the same thing: After a reboot, GPIOs only work after I restart GPIOs. After that, it works as supposed.
Anyway - Great software!
Martin