2018-05-02, 06:26 PM
(This post was last modified: 2018-05-02, 10:16 PM by cepicscepics.)
(2018-03-02, 12:37 PM)Sailoog Wrote: Please update to 0.17.1, configure iMU on compass tab and rest of sensors on I2C tab. Unplug USB devices to be sure you do not have power issues
now on 0.17.1 but same message...
Failed to open I2C bus 1
Failed to open SPI bus 0, select 0
Failed to open SPI bus 0, select 1
No IMU detected
Failed to open I2C bus 1
No pressure sensor detected
Failed to open I2C bus 1
No humidity sensor detected
all usb unplugged
with OP 0.8 the i2c works
Op 0.17.1
Rpi3
official 7" display
Gps USB (unplugged)
Imu MPU 9250
Pressure BMP180
Temperature HTU21D
Humidity HTU21D
Ais reciver 820t2 & sdr (unplugged)
5A (3A+2A)