In the last update with 4 ADS1115 support work only one ADS1115, the first one. In SignalK diagnostics there are all source blocks but the value of the second and third ADS1115 (i have 3) are zero.
New OpenPlotter v0.10.0alpha release
|
2017-04-21, 11:01 PM
1W - deleting and adding back in did the trick. Thanks. SK diagnostic displays a Celsius value, Web socket displays a Kelvin value. I was hoping to display Fahrenheit from NMEA 0183 output. Is that possible?
Many thanks.
2017-04-22, 07:47 AM
Hi,
Even nmea 0183 generator to me no longer works with update 11.1. There are strings but the values are at 0.
2017-04-22, 02:00 PM
(2017-04-22, 07:47 AM)kste Wrote: Hi,Same here, error python: can't open file '/home/pi/.config/openplotter/tools/NMEA_0183_generator_d.py': [Errno 2] No such file or directory Sent from my SGP511 using Tapatalk
2017-04-23, 08:24 AM
Everything updated as of today version 0.11.2, RPi 3,
GPS on ttyS0 is unavailable. ttyS0 is added to serial interfaces in NMEA0183 tab as "gps" running openplotter in terminal produces Failed to open /dev/ttyS0: Permision denied Failed to initialize interface gps Running sudo systemctl stop serial-getty@ttyS0 sudo chmod 666 /dev/ttyS0 Solves the problem; but how do I make this a permanent fix so that I don't have to do it on every boot? Something to do with stopping spawning of getty? Can this be fixed so that the user doesn't have to mess around with it? Chris
2017-04-23, 10:50 PM
I2C is working fine.- DS18b20, MPU6050, HTU21D, BMP180 - all look great! NMEA 0183 and 2000 generators are working for me.
Great progress! Re temperature conversions - the NMEA 0183 generator doing Kelvin temps to Celsius. OpenCPN - a new NMEA converter under development - havent tried it yet.
2017-04-24, 12:11 AM
(2017-04-21, 10:37 PM)kste Wrote: In the last update with 4 ADS1115 support work only one ADS1115, the first one. In SignalK diagnostics there are all source blocks but the value of the second and third ADS1115 (i have 3) are zero. It was my mistake in the file openplotter_analog.conf. Now it works properly. (2017-04-22, 07:47 AM)kste Wrote: Hi, If debugging opeplotter started and after SignalK diagnostic startup, the terminal appears: no unit for electrical.batteries.servizi.current no unit for electrical.batteries.main.capacity.StatoBatteria no unit for electrical.batteries.main.capacity.OreResidue.TTg no unit for electrical.batteries.main.capacity.AhMassimeAssorbite.H1 no unit for electrical.batteries.main.capacity.AhUtilizzate.H2 no unit for electrical.batteries.main.capacity.AhTotaleConsumiRegistrati.H6 no unit for electrical.batteries.main.capacity.AhUtilizzate.CE no unit for navigation.gnss.differentialReference no unit for navigation.gnss.horizontalDilution no unit for navigation.gnss.geoidalSeparation no unit for navigation.gnss.satellites no unit for navigation.gnss.quality no unit for electrical.batteries.rpi3V.voltage no unit for electrical.batteries.rpi5V.voltage no unit for tanks.freshWater.300LtPrua.currentVolume
2017-04-24, 06:10 PM
(2017-04-24, 07:18 AM)kste Wrote:OK Solved!(2017-04-22, 07:47 AM)kste Wrote: Hi, The NMEA 0183 sentences in openplotter.conf with the SignalK .value, previously worked regularly, now does not work, I removed .value.
2017-04-26, 06:42 AM
1W sensor values are missing from Signal-K on reboot. I can only make them reappear by going to the 1W tab, editing the entry and saving.
Up-to-date OP 0.11.2a on RPI 3 Chris |
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)