2018-02-07, 09:28 AM
(2018-02-07, 09:18 AM)shipahoy Wrote: The ST50 is probably so old that it uses NMEA 0183 version 1. This is not RS422 but RS232.Maybe, but it will only be 12v not +/-12v.
You should try with a USB-RS232 converter (preferebly isolated). Remember to set the baudrate to 4800 baud.
(2018-02-07, 09:16 AM)marko_st Wrote: - on transmiter side is ST50 which have TTL(UART) output
That mean you need UART to USB converter between this two parts.
I am quite sure that this would destroy the UART to USB converter because it only handles 0 to 3.3 or 5 V, and this output is probably ±12 V.
This converter is very cheap so...
Maybe try to measure ST30 output with oscilloscope to check voltage. If it is 12v, you can use simple voltage divider with two resistor.
Poslano sa mog Redmi Note 4 koristeći Tapatalk