abarrow
i have the same power supply in your link.and have the same problem as you + i need to restart i2c and 1w to get them to show on sk diag.after reboot.
i am thinking it could be the mini usb "power"cable i am going to try to solder wires to the pads under the usb socket with better wire than what the usb cable has.
give it a bigger straw to drink through
when i use the hdmi monitor it shows the power bolt thingy sometimes ..
i will post the results when i get around to doing the soldering on the board..
i have the same power supply in your link.and have the same problem as you + i need to restart i2c and 1w to get them to show on sk diag.after reboot.
i am thinking it could be the mini usb "power"cable i am going to try to solder wires to the pads under the usb socket with better wire than what the usb cable has.
give it a bigger straw to drink through
when i use the hdmi monitor it shows the power bolt thingy sometimes ..
i will post the results when i get around to doing the soldering on the board..