i found all the parts pieces and breadboard for testing.
i did the change in the file e-sailing posted ..that should be all you need to do.
sudo nano /home/pi/.config/openplotter/read_sensors_d.py
change "spi.open(0,1)" to "spi.open(0,0)". (line 437)
ctrl x y
let me know if that works for you..
i did the change in the file e-sailing posted ..that should be all you need to do.
sudo nano /home/pi/.config/openplotter/read_sensors_d.py
change "spi.open(0,1)" to "spi.open(0,0)". (line 437)
ctrl x y
let me know if that works for you..