This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting NMEA Wind data from NASA Clipper
#71
(06-30-2018, 02:13 PM)jim321 Wrote: Thanks
in v.1.0.X its Kplex tab. that screen shot must be v.0.1.X
i put it at the end..

Yup, just took it right off the web...I am running 1.0.0 myself.

Did it work?

this is what my edit looks like:
-----------------
###OpenPlotter GUI settings

[serial]
name=GP
direction=in
optional=yes
filename=/dev/ttyOP_GP
baud=4800

[serial]
name=WD
direction=in
strict=no
optional=yes
filename=/dev/ttyOP_WD
baud=4800

###end of OpenPlotter GUI settings

###Manual settings
--------------------------------------------
/M
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)