GPS USB-Mouse is no longer recognized by OpenCPN

[waldmattis]

"I think the GPS is shown there.
(when I plug it in and out the list of devices changes) "

did you select the one that shows when plugged in and push the auto button or name it  and push the apply button.
it needs to be installed there before the sys see's it

@jim321
This advice did it!!!  

Thank you so much!
Now the GPS is working fine again.
Now I am going to fix the next problem
Getting my AIS by SDR working.

Thank you so much again.

---

Looks good. Kernel has recognized you GPS

[ 5356.132237] usb 1-1.4: new full-speed USB device number 6 using dwc_otg
[ 5356.264434] usb 1-1.4: New USB device found, idVendor=1546, idProduct=01a5
[ 5356.264458] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5356.264468] usb 1-1.4: Product: u-blox 5  -  GPS Receiver
[ 5356.264483] usb 1-1.4: Manufacturer: u-blox AG - http://www.u-blox.com
[ 5356.265812] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device

Now you can test device

Code:

ls -la /dev/ttyACM0
id $USER
minicom -D /dev/ttyACM0 -b <baudrate>

If you havn't "minicom"

Code:

aptitude install minicom

@BlackSea
Thank you very much for Your efforts to help me.
MeanwhileI got it work with advice from jim321