2016-06-02, 08:40 PM
Let's try more things...
To check if GPSD is working, open OP, select "set GPSD" from menu settings, check:
star_daemon="false"
USBAUTO="false"
Run Op in debug mode:
Open a terminal and type
set the serial connection in NMEA 0183 tab, apply defaults, check opencpn in case signal is arriving, open inspector from OP GUI (not from toolbar). If you get some error in terminal copy and paste here.
To check if GPSD is working, open OP, select "set GPSD" from menu settings, check:
star_daemon="false"
USBAUTO="false"
Run Op in debug mode:
Open a terminal and type
Code:
python /home/pi/.config/openplotter/openplotter.py
set the serial connection in NMEA 0183 tab, apply defaults, check opencpn in case signal is arriving, open inspector from OP GUI (not from toolbar). If you get some error in terminal copy and paste here.