2018-07-08, 10:55 PM
(2018-07-08, 10:12 PM)agv Wrote: I am running OP 1.0.2 on a RPi 3 with OpenCPN 4.8.4
At home using a 10" hdmi display everything runs fine. On my boat I use a Faytech 10" display. The system starts up normally, OP is started, but hangs at the command
'checking 400 x 800 display' and keeps hanging. The Faytech display did work with older OP versions.
Ik know the Faytech display needs an Egalax driver and this driver is installed. Any further suggestions?
Regards, Andries
Updated the latest Linux files with sudo apt update en then sudo apt upgrade and the problem seems to be gone. Otherwise you can adjust the monitor setting, that also worked.
But here is the problem no longer a problem. It is a bit strange. Sometimes the starting sequens worked well and sometimes it hung on the screen setting.