filetransfer with x11vnc

[SkipperEarly]

would like to use the file transfer facility of x11vnc to update charts, polars and Opencpn settings from my PC.

On the PC I run win10 and RealVNC.

In the default startup of VNC server within OP the file transfer is not enabled and I could not find where in which config file I could set this. So I started another x11vnc session and enabled the f/t option.
However when connecting from the PC the session shown that the option is not allowed.

Has anyone tried/solved this ?

Thanks for advise.

[PaddyB]

I use filezilla on a win7 laptop connected over wifi.

Sent from my SGP511 using Tapatalk

[Sailoog]

Have you tried Menu>Internet>X11VNC Server?

[Tacmed]

Sudo apt-get install ftpd
This loads an ftp server.
I found it quicker to remove the microsim and dump the charts directly to the chart folder.
It saved having an ftp server chewing up cpu time for a rare use.

[SkipperEarly]

Have you tried Menu>Internet>X11VNC Server?

yes, enabled transfer but without success