I made next steps:
>sudo apt install python-lirc python-pylirc
afer that I see:
pi@openplotter:~ $ pypilot_lcdclient nokia5110
have gpio for raspberry pi
have lirc for remote control
init...
using nokia5110
loading load config file: /home/pi/.pypilot/lcdclient.conf
failed to load config file: /home/pi/.pypilot/lcdclient.conf
pypilot: could not open config files /home/pi/.lircrc and /etc/lirc/lircrc
pypilot: No such file or directory
failed to initialize lirc. is .lircrc missing?
connected
but pressing to any key doesdn't make results. Nothing effect.
software irw shows successful recognizing remote control's keys:
pi@openplotter:~ $ irw
0000000008f7807f 00 KEY_POWER remote
0000000008f700ff 00 KEY_SELECT remote
0000000008f740bf 00 KEY_MUTE remote
0000000008f7708f 00 KEY_RIGHT remote
0000000008f748b7 00 KEY_LEFT remote
0000000008f78877 00 KEY_UP remote
0000000008f7a857 00 KEY_DOWN remote
where is my mistake?
>sudo apt install python-lirc python-pylirc
afer that I see:
pi@openplotter:~ $ pypilot_lcdclient nokia5110
have gpio for raspberry pi
have lirc for remote control
init...
using nokia5110
loading load config file: /home/pi/.pypilot/lcdclient.conf
failed to load config file: /home/pi/.pypilot/lcdclient.conf
pypilot: could not open config files /home/pi/.lircrc and /etc/lirc/lircrc
pypilot: No such file or directory
failed to initialize lirc. is .lircrc missing?
connected
but pressing to any key doesdn't make results. Nothing effect.
software irw shows successful recognizing remote control's keys:
pi@openplotter:~ $ irw
0000000008f7807f 00 KEY_POWER remote
0000000008f700ff 00 KEY_SELECT remote
0000000008f740bf 00 KEY_MUTE remote
0000000008f7708f 00 KEY_RIGHT remote
0000000008f748b7 00 KEY_LEFT remote
0000000008f78877 00 KEY_UP remote
0000000008f7a857 00 KEY_DOWN remote
where is my mistake?