This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NMEA data export in OpenCPN 1.1.0 alpha
#1
Hi all, I just moved from the old openplotter to the latest version on my RPI3.

In OpenCPN I used to have 1 data import connection and one export connection by default.

In the new OpenCPN, I only have a import. As I want to export my route data to my GPS repeater and autopilot as NMEA, I want to have an export as well.
Which address should I use for that?
Reply
#2
Connect your serial device. In serial tab give it a name /dev/ttyOP_xxx and assign to "none".
In opencpn create a serial output and write /dev/ttyOP_xxx in DataPort. Select bauds and "output on this port"
Reply
#3
Excellent thanks!
Can you just copy this answer to the manual?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)